Premium Vehicle Wrapping Portsmouth
Vehicle wrapping for Portsmouth customers
Thank you for considering South Coast Wrapping for premium vehicle wrapping near Portsmouth. From a full colour change to a contrasting roof, printed design or business vehicle graphics, we are here to help with your project at our Havant workshop.
Browse our recent work below, then tell us about your vehicle and the finish you have in mind. We work with established vinyl brands including 3M and Avery Dennison, and will explain the material, preparation and coverage before preparing your quotation.
Colour-change wraps
Transform the appearance of your car with gloss, satin or matte vinyl. A wrap changes the visible finish without repainting, but it is not a substitute for paint protection film when stone-chip protection is your main aim.
Printed & partial wraps
Make your vehicle individual with a custom printed wrap, a contrasting roof or selected panels. We assess the existing paint first: vinyl follows the surface underneath and will not repair peeling lacquer, rust or dents.
Business vehicle graphics
Put your business on the road with clear, well-planned vehicle graphics. From a single van to a coordinated fleet, we can discuss branding, layout and the right amount of coverage for your budget.
A distinctive finish. Careful preparation. Attention to every edge.
South Coast Wrapping
From your first idea to the final reveal
Start with your vehicle make, model, a few clear photographs and the look you want to achieve. We will discuss the scope, inspect the paintwork where needed and explain your quotation before you book.
Choose the material in person
Photographs and screens can change how a colour looks. Viewing physical swatches at our Havant workshop is the best way to compare gloss, satin, matte and specialist finishes. We work with established vinyl brands including 3M, Avery Dennison, Arlon, Metamark and Oracal, with the choice depending on the project.
Preparation, fitting and collection
We clean and prepare the surfaces, fit the vinyl around the vehicle’s contours and pay attention to edges and finishing details. A full wrap typically needs around five to six days in the workshop; the vehicle, coverage and preparation can affect that schedule. We confirm the timings for your booking and explain the aftercare before collection.
A 25% deposit secures your booking. Our workshop is at Unit 1, 26 Scratchface Lane, Havant, Hampshire, PO9 3NG, with access from Portsmouth via the A27 and A3(M). Please arrange your visit in advance so we can compare swatches, assess the paintwork and agree drop-off and collection.
Explore our vehicle wrapping projects
Explore real colour changes, printed designs and finishing details from our South Coast workshop. Tap a project to enlarge it, then browse through the photographs.
Gloss, satin or matte? Find your finish.
Gloss gives a reflective finish and a familiar painted look. Satin offers a softer sheen, while matte creates a flatter appearance. Textured and specialist films offer further options, depending on availability and the surfaces being wrapped.
Think about the whole vehicle: wheels, trim, roof and existing paint colour all influence the result. Tell us whether you want the visible exterior only or would like a quotation for door shuts and returns as well. We will explain what is included so the coverage is clear.
Vinyl wrap or paint protection film?
Vinyl wrapping is primarily about changing appearance. PPF is designed for paint protection, and coloured PPF combines a different look with protective film. If your priority is resistance to stone chips rather than a colour change alone, ask us to compare the options before deciding.
A closer look at a custom printed wrap
This illustrated Porsche project shows how a printed design works across the whole car, from the bonnet to the rear quarters. Browse the gallery for full-vehicle views and closer finishing details.
SOUTH COAST WRAPPING ON YOUTUBE
Follow the build. See the finish.
Go behind the scenes at our Hampshire workshop and see the work that goes into a premium vehicle wrap. Explore colour changes, custom designs and the finishing details behind the final reveal.
Subscribe to South Coast Wrapping on YouTube to follow our projects and catch new videos as they arrive.
South Coast WrappingExplore our YouTube channelLooking after your vehicle wrap
Care requirements vary by film and finish, so follow the guidance supplied with your installation. Gentle hand washing with suitable products is usually the safest starting point. Avoid abrasive polishing on matte or satin film and do not direct a pressure washer closely at edges.
Remove bird droppings, insects and other contamination promptly using an appropriate method. If an edge lifts or a panel is damaged, contact us before attempting a repair. Storage, exposure, film choice and maintenance all influence how a wrap ages.
Planning removal or a future colour change
Vinyl can be removed, but the condition and history of the underlying paint matter. Repainted panels, weak lacquer and aged film can increase the risk of damage during removal. We can inspect your vehicle and discuss the right approach rather than promise that every wrap will come off without a trace.
Vehicle wrapping: your questions answered
How much does a car wrap cost?
The price depends on vehicle size and shape, film choice, paint preparation and coverage. Printed artwork and door shuts can change the scope too. Read our car wrap cost guide, then send us your vehicle details for a tailored quotation.
Can you wrap a car with damaged paint?
We need to assess it first. Vinyl does not hide every defect, and unstable paint can affect adhesion and removal. Any repairs or preparation should be agreed before installation.
How long will the wrap last?
There is no single lifespan for every wrap. The film, finish, surface orientation, use, weather exposure and care all matter. We explain the relevant product guidance and warranty terms for the material quoted.
Can you wrap just the roof or selected panels?
Yes. Ask about partial wraps, contrasting roofs and accent details. We will check the panel condition and agree the areas included.
Can I see colours before booking?
Yes. Contact us to arrange a workshop visit and compare physical swatches. It is particularly useful when choosing between similar colours or finishes.
Where is your workshop for Portsmouth customers?
Our workshop is at Unit 1, 26 Scratchface Lane, Havant, Hampshire, PO9 3NG, with access from Portsmouth via the A27 and A3(M). Please arrange your visit in advance so we can compare swatches, assess the paintwork and agree drop-off and collection.
Tell us about your vehicle and request a wrapping quotation.
Request your Portsmouth vehicle wrapping quotation
Tell us your vehicle make and model, the finish you would like and whether you want a full exterior wrap, selected panels or business graphics. Include photographs and any questions so we can understand the work before quoting.
Our workshop is at Unit 1, 26 Scratchface Lane, Havant, Hampshire, PO9 3NG, with access from Portsmouth via the A27 and A3(M). Please arrange your visit in advance so we can compare swatches, assess the paintwork and agree drop-off and collection.
You can also call 02393 190 801 or email info@southcoastwrapping.com. Ask us about any additional vinyl details you would like included.
Google Maps is paused until you choose to load it. Loading sends technical information, including your IP address, to Google.
Unit 1, 26 Scratchface Lane, Havant, Hampshire, PO9 3NG. Privacy & cookies


















